About the 3D Model
3D Model to Print 1.25-inch Filter Adapter for OGMA Guide/Planetary Cameras
After carefully removing the included UV/IR Cut protective window, you can use this product as an adapter to attach different filters to the Guide/Planetary cameras.
This product isn't currently sold due to its limited use, but we have made a 3D model available for those who need it.
This 3D model is licensed under the Creative Commons Attribution-NonCommercial (CC BY-NC) license. You can download, print, and modify the files for personal use only. Commercial use, including selling the models or any derivatives, is prohibited.
Images
3D Printing Recommendations
These parts require a high degree of dimensional accuracy to ensure proper fit, prevent light leaks, and allow filters to screw in as expected. Achieving such accuracy through 3D printing can be challenging, especially if your printer is out of calibration or if the filament shrinks or expands as it cools.
Calibrate: Before printing the full models, print a test cube of known dimensions and measure it with a caliper. Use this test to determine any necessary adjustments for dimensional accuracy. Many calibration figures and test cube models are available online. Once you know how much your prints shrink or expand, use your slicing software to apply the corresponding correction to each axis.
If using commercial 3D Printing Services: Before ordering prints, inquire about their processes for ensuring dimensional accuracy.
Warning
Do not twist the black tip of the camera against the gold-colored section. These parts are glued together, and twisting them may break the bond.
Proper Installation
Rotate only the black sections against each other when loosening or tightening. This ensures a secure connection without damaging the camera.