Ogma Filter Wheel 36mm x 7 Positions for Unmounted Filters (OFW736)

Camera and Telescope Compatibility

The Ogma Filter Wheels can be easily connected to:

  • All Ogma cooled cameras.
  • The Newest Touptek cooled cameras that share the same front plate as OGMA.
  • The older Touptek cooled cameras, through the large M42 thread around the sensor.
  • Most ZWO cooled cameras that have six tapped holes distributed on a circumference of 62 mm in diameter for M2.5 screws.
  • (Untested) - Most QHY cameras that have six tapped holes distributed on a circumference of 62 mm in diameter for M2.5. This will require six screws M3.
  • In addition, the package includes three adapters with the most commonly used thread for astrophotography. These adapters can be used to connect the filter wheel to a variety of cameras and telescopes:
    • M42(M) to M54 (M) x 1mm extension
    • M54(M) to M54 (M) x 1mm extension
    • M54(M) to M48 (F) x 16.5mm extension

Using with INDI?

To use the filter wheel with the INDI platform on Linux, open KStars, navigate to the profile editor, and select 'Ogmacam EFW' as your equipment. This will ensure seamless integration and control of the filter wheel within the INDI environment.

Warranty

OGMA warrants your product to be free from defects in materials and workmanship for one year. OGMA will repair or replace a product or part which, upon inspection by OGMA, is found to be defective during one year following the date that you receive the equipment.

For specific details, read OGMA's limited warranty.