OGMA Electronic Filter Wheel 7 x 2-inch Mounted OFW72i (White Box)
Our largest filter wheel. Kiss goodbye to swapping filters in the dark.
Automated Convenience: Easily swap filters at the click of a button.
USB-powered: No additional power source is needed.
Compatible: Multiple platforms.
Thin: Takes only 20mm of back focus
Lightweight: 658 grams, without filters
Camera and Telescope Compatibility
The Ogma Filter Wheels can be easily connected to:
All Ogma cooled cameras.
The Newest Touptek cooled cameras that share the same front plate as OGMA.
The older Touptek cooled cameras, through the large M42 thread around the sensor.
Most ZWO cooled cameras that have six tapped holes distributed on a circumference of 62 mm in diameter for M2.5 screws.
(Untested) - Most QHY cameras that have six tapped holes distributed on a circumference of 62 mm in diameter for M2.5. This will require six screws M3.
In addition, the package includes three adapters with the most commonly used thread for astrophotography. These adapters can be used to connect the filter wheel to a variety of cameras and telescopes:
M42(M) to M54 (M) x 1mm extension
M54(M) to M54 (M) x 1mm extension
M54(M) to M48 (F) x 16.5mm extension
OFW72i Mechanical Drawings
Using with INDI
To use the filter wheel with the INDI platform on Linux, open KStars, navigate to the profile editor, and select 'Ogmacam EFW' as your equipment. This will ensure seamless integration and control of the filter wheel within the INDI environment.
Warranty
OGMA warrants your product to be free from defects in materials and workmanship for one year. OGMA will repair or replace a product or part which, upon inspection by OGMA, is found to be defective during one year following the date that you receive the equipment.
For specific details, read OGMA's limited warranty.